Multi-ring Tu 413 Protekt

TU 413

TU413 multicircle

ref. No. TU413

TECHNICAL SPECIFICATIONS:

• Weight: 2.47 (without working rope)
• Maximum rope diameter: 12 mm
• Ratio: 3: 1
• Minimum breaking force: 50 kN
• Permissible working load: 10 kN
• Safety factor: 5: 1

PURPOSE

• The TU 413 multi-rounder can be used for climbing trees (felling trees in sections) and transporting loads
• The device is designed for lifting and lowering loads
• It is not intended for use as personal fall protection

PROJECT

• The TU 413 multi-cord set consists of the following components:
• Upper pulley with two wheels
• Lower pulley with one wheel
• Connector for connecting the end of the working rope to the lower pulley
• Working rope

USED MATERIALS

• Both pulleys (upper and lower) consist of wheels made of plastic - radilon (mounted on ball bearings, allowing the wheel to move freely under load) connected to galvanized steel plates
• Axles and fasteners (bolts, nuts, washers) are made of galvanized steel
• Each wheel is equipped with a swivel eye made of aluminum alloy
• The eye of the upper pulley can be further rotated relative to the body of the pulley

WORKING ROPE LENGTH RANGE

As the force required to lift or descend a load decreases, the length of rope "S" required to lift the load to height "H" increases threefold. Example: if you want to lift a load to a height of H = 3m, from the pulley take a rope length of S = 3 * H = 3 * 3m = 9m. Take this into account when choosing the required rope length

Multi round can only be used with textile rope, max diameter ø 12mm