Filtering half mask against dust Fs-17 V FFP1 Nr D 12345

FS-17 V FFP1 NR D half mask respirator.

Category: Standard

Class: P1

PAC: 4 x PAC

Standard: EN 149:2001 + A1:2009

Certificate: CE certificate 1001290 issued by IFA in Germany.

One of the most popular half-mask respirators in Poland in P1 class with valve.

It has been produced since 1997. This model has been modified several times.

Improvements have been made primarily in filtration efficiency while reducing airflow resistance.

For customers, the most noticeable change in the product was the introduction of a new canopy seal resembling the combined layers of dough in pierogies.

The product gained particular popularity after Poland's accession to the European Union, when the FM-0/17 P1S half-mask with valve was withdrawn from production

Application:

Non-toxic dust, agricultural industry, food industry, use in quarries, cement plants,

wood industry in the processing of softwood (coniferous),

and especially for such dusts as calcium carbonate, natural and synthetic graphite, gypsum, chalk, cement, plaster, marble,

zinc oxide, pollen, cellulose, sulfur, cotton, ferrous metal filings , coal dust containing less than 10% free silica.

Additional advantages:

The three-layer structure with welding on the periphery of the respirator and the fitted exhalation valve make the breathing resistance very low.

Serves:

For respiratory protection against dusts, particulate aerosols and liquid aerosols up to 4 x PAC.

Composition:

Needled non-woven polypropylene-polyester fabric

Non-woven polypropylene melt blown type

Nose clip for tightening the respirator at the nose area

Head strap buckles for adjusting the length of the head straps

Head strap

Polyurethane foam nose seal

Exhalation valve